Brocade Mobility Access Point System Reference Guide (Supporting software release 5.5.0.0 and later) - Manual (Page 163)

Brocade Mobility Access Point System Reference Guide 153
53-1003100-01
5
FIGURE 57 Network - Alias - Network Group Alias Add screen
2. If adding a new Network Group Alias, provide it a name of up to 32 characters.
NOTE
The Network Group Alias Name always starts with a dollar sign ($).
3. Define the following network group alias parameters:
4. Within the Range table, use the + Add Row button to specify the Start IP address and End IP
address for the alias range or double-click on an existing an alias range entry to edit it.
5. Select OK when completed to update the network group alias rules. Select Reset to revert the
screen back to its last saved configuration.
Host Specify the Host IP address for up to eight IP addresses supporting network aliasing. Select the down
arrow to add the IP address to the table.
Network Specify the netmask for up to eight IP addresses supporting network aliasing. Subnets can improve
network security and performance by organizing hosts into logical groups. Applying the subnet mask to an
IP address separates the address into a host address and an extended network address. Select the down
arrow to add the mask to the table.