Brocade Mobility Access Point System Reference Guide (Supporting software release 5.5.0.0 and later) - Manual (Page 700)

690 Brocade Mobility Access Point System Reference Guide
53-1003100-01
12
FIGURE 47 Certificate Management - Create CSR screen
3. Define the following configuration parameters required to Create New Certificate Signing
Request (CSR):
4. Set the following Certificate Subject Name parameters required for the creation of the
certificate:
RSA Key: Use Existing Select the radio button and use the drop-down menu to select the existing key used by
both the access point and the server (or repository) of the target RSA key.
RSA Key: Create New Create or use an existing key by selecting the appropriate radio button. Use the spinner
control to set the size of the key (between 1,024 - 2,048 bits). Brocade recommends
leaving this value at the default setting of 1024 to ensure optimum functionality. For more
information, see RSA Key Management on page 12-682.
Certificate Subject Name Select either the auto-generate radio button to automatically create the certificate's
subject credentials or select user-defined to manually enter the credentials of the self
signed certificate. The default setting is auto-generate.
Country (C) Define the Country used in the CSR. The field can be modified by the user to other values.
This is a required field and must not exceed 2 characters.
State (ST) Enter a State/Prov. for the state or province name used in the CSR. This is a required
field.
City (L) Enter a City to represent the city name used in the CSR. This is a required field.
Organization (O) Define an Organization for the organization used in the CSR. This is a required field.