Brocade Mobility Access Point System Reference Guide (Supporting software release 5.5.0.0 and later) - Manual (Page 606)

596 Brocade Mobility Access Point System Reference Guide
53-1003100-01
9
• The creation of a start and end of time in (HH:MM) when a user is allowed to authenticate
• The creation of a list of SSIDs to which a user belonging to this group is allowed to associate
• The ability to set the days of the week a user is allowed to login
• The ability to rate limit traffic
To review existing RADIUS groups and add, modify or delete group configurations:
1. Select Configuration tab from the web user interface.
Select Services.
2. Select RADIUS.
A list of existing groups displays by default.
FIGURE 16 RADIUS Group screen
3. Review the following read-only information for existing groups to determine if a new group
requires creation or an existing group requires modification:
RADIUS Group Displays the group name or identifier assigned to each listed group when it was created.
The name cannot exceed 32 characters or be modified as part of the group‘s edit
process.
Guest User Group Specifies whether a user group only has guest access and temporary permissions to the
local RADIUS server. The terms of the guest access can be set uniquely for each group. A
red “X” designates the group as having permanent access to the local RADIUS server.
Guest user groups cannot be made management groups with unique access and role
permissions.
Management Group A green checkmark designates this RADIUS user group as a management group.
Management groups can be assigned unique access and role permissions.