Ap detection – Brocade Mobility Access Point System Reference Guide (Supporting software release 5.5.0.0 and later) User Manual
Page 724
714
Brocade Mobility Access Point System Reference Guide
53-1003100-01
13
FIGURE 10
RF Domain - Devices screen
AP Detection
The AP Detection screen displays information about detected access points that are not members
of a RF Domain. The could be authorized devices or potential rogue devices.
To view device information on detected access points:
1. Select the Statistics menu from the Web UI.
2. Select a RF Domain from under the System node on the top, left-hand side, of the screen.
3. Select AP Detection from the RF Domain menu.
Device
Displays the system assigned name of each device that’s a member of the RF Domain.
The name displays as a link that can be selected to display configuration and network
address information in greater detail.
AP MAC Address
Displays each device’s factory encoded MAC address as its hardware identifier.
Type
Displays each device model within the selected RF Domain.
Client Count
Displays the number of clients connected with each listed device. AP1220, AP71xx,
AP1240 models can support up to 256 clients per access point. Brocade Mobility 6511
Access Point can support up to 128 clients per access point.
Radio Count
Displays the number of radios on each listed device. Brocade Mobility 7131 Access
PointN models can support from 1-3 radios depending on the hardware SKU. AP1220,
AP71xx, and AP1240 models have two radios. Brocade Mobility 6511 Access Point have
one radio.
IP Address
Displays the IP address each listed device is using a network identifier.
Refresh
Select the Refresh button to update the statistics counters to their latest values.