Radios, Status – Brocade Mobility Access Point System Reference Guide (Supporting software release 5.5.0.0 and later) User Manual
Page 729
Brocade Mobility Access Point System Reference Guide
719
53-1003100-01
13
Radios
The Radio screens displays information on RF Domain member access point radios. Use these
screens to troubleshooting radio issues negatively impacting RF Domain performance.
For more information, refer to the following:
•
•
•
Status
To view the RF Domain radio statistics:
1. Select the Statistics menu from the Web UI.
2. Select a RF Domain from under the System node on the top, left-hand side, of the screen.
3. Expand Radios from the RF Domain menu and select Status.
Traffic Index
Displays the traffic utilization index of each listed WLAN, which measures how efficiently the
traffic medium is used. It’s defined as the percentage of current throughput relative to the
maximum possible throughput. Traffic indices are: 0 – 20 (very low utilization), 20 – 40 (low
utilization), 40 – 60 (moderate utilization), and 60 and above (high utilization).
Radio Count
Displays the number of radios deployed in each listed WLAN by RF Domain member devices.
Tx Bytes
Displays the average number of packets (in bytes) sent on each listed RF Domain member
WLAN.
Tx User Data Rate
Displays the average data rate per user for packets transmitted on each listed RF Domain
member WLAN.
Rx Bytes
Displays the average number of packets (in bytes) received on each listed RF Domain member
WLAN.
Rx User Data Rate
Displays the average data rate per user for packets received on each listed RF Domain member
WLAN.
Disconnect All Clients
Select the Disconnect All Clients button to terminate each listed client’s WLAN membership
from this RF Domain.
Refresh
Select the Refresh button to update the statistics counters to their latest values.