Brocade Mobility Access Point System Reference Guide (Supporting software release 5.5.0.0 and later) - Manual (Page 477)

Brocade Mobility Access Point System Reference Guide 467
53-1003100-01
6
FIGURE 33 SMART RF - Channel and Power screen
9. Refer to the Power Settings field to define Smart RF recovery settings for the access point’s 5.0
GHz (802.11a) and 2.4 GHz (802.11bg) radio.
5 GHz Minimum Power Use the spinner control to select a 1 - 20 dBm minimum power level for Smart RF to assign to a
radio in the 5.0 GHz band. The default setting is 4 dBm.
5 GHz Maximum Power Use the spinner control to select a 1 - 20 dBm maximum power level Smart RF can assign a radio in
the 5.0 GHz band. The default setting is 17 dBm.
2.4 GHz Minimum Power Use the spinner control to select a 1 - 20 dBm minimum power level Smart RF can assign a radio in
the 2.4 GHz band. The default setting is 4 dBm.
2.4 GHz Maximum Power Use the spinner control to select a 1 - 20 dBm maximum power level Smart RF can assign a radio in
the 2.4 GHz band. The default setting is 17 dBm.