Brocade Mobility Access Point System Reference Guide (Supporting software release 5.5.0.0 and later) - Manual (Page 504)

494 Brocade Mobility Access Point System Reference Guide
53-1003100-01
7
FIGURE 2 Policy Based Routing screen - Route Maps tab
6. Refer to the following to determine whether a new route-map configuration requires creation or
an existing route-map requires modification or removal:
7. Select Add or Edit to create or modify a route-map configuration.
Precedence Lists the numeric precedence (priority) assigned to each listed PBR configuration. A route-map
consists of multiple entries, each carrying a precedence value. An incoming packet is matched
against the route-map with the highest precedence (lowest numerical value).
DSCP Displays each policy’s DSCP value used as matching criteria for the route map. DSCP is the
Differentiated Services Code Point field in an IP header and is for packet classification. Packets are
filtered based on the traffic class defined in the IP DSCP field. One DSCP value can be configured
per route map entry.
Role Policy Lists each policy’s role policy used as matching criteria.
User Role Lists the user role defined in the Role Policy.
Access Control List Displays each policy’s IP ACL used as an access/deny filter criteria for the route map.
WLAN Displays each policy’s WLAN used as an access/deny filter for the route map.
Incoming Interface Display the name of the access point WWAN or VLAN interface on which the packet is received for
the listed PBR policy.