Brocade Mobility Access Point System Reference Guide (Supporting software release 5.5.0.0 and later) - Manual (Page 475)

Brocade Mobility Access Point System Reference Guide 465
53-1003100-01
6
NOTE
RF planning must be performed to ensure overlapping coverage exists at a deployment site for
Smart RF to be a viable network performance tool. Smart RF can only provide recovery when access
points are deployed appropriately. Smart RF is not a solution, it's a temporary measure.
Administrators need to determine the root cause of RF deterioration and fix it. Smart RF
history/events can assist.
CAUTION
The access point’s Smart RF feature is not able to detect a voice call in progress, and will switch
to a different channel resulting in voice call reconnections and communication disruptions.
To define the Smart RF configuration:
1. Select the Configuration tab from the Web UI.
2. Select Wireless.
3. Select Smart RF.
The Basic Configuration screen displays by default.
4. Select the Activate SMART RF Policy option to enable the parameters on the screen for
configuration. The configuration cannot be applied to the access point profile unless this
settings is selected and remains enabled.
FIGURE 32 SMART RF - Basic Configuration screen