System information – Brocade Mobility Access Point System Reference Guide (Supporting software release 5.5.0.0 and later) User Manual
Page 49
![background image](/manuals/361710/49/background.png)
Brocade Mobility Access Point System Reference Guide
39
53-1003100-01
3
•
Onboard RADIUS Server – When selected, a new screen displays where further
configuration can be performed. For more information, see RADIUS Server
Configuration on page 3-26.
•
PSK authentication, WPA2 encryption – Configures a network that uses PSK
authentication and WPA2 encryption. Select this option to implement a pre-shared key
that must be correctly shared between the access point and requesting clients on the
WLAN
•
WPA Key – Provide a 64 character HEX key or 8-63 character ASCII key. Use the
drop-down to specify the type of key provided. Select ASCII or HEX to specify the key
type provided in the WPA Key field.
•
EAP Authentication and WPA2 Encryption – Configures a network that uses EAP
authentication and WPA2 encryption.Select this option to authenticate clients within this
WLAN through the exchange and verification of certificates.
•
External RADIUS Server – When selected, provide the IP address of the external
RADIUS server used for user authentication. Also provide the shared secret in the
RADIUS Shared Secret field.
•
Onboard RADIUS Server – When selected, a new screen is displayed where further
configuration can be performed. For more information, see RADIUS Server
Configuration on page 3-26.
Select Next. The Advanced Setup Wizard displays the RADIUS Server Configuration screen if
required. This screen is only displayed when Onboard RADIUS Server is selected for either Captive
Portal Authentication And No Encryption or for EAP Authentication and WPA2 Encryption fields. For
more information, see RADIUS Server Configuration on page 3-26.
Otherwise, the Advanced Setup Wizard displays the System Information screen. For more
information, see System Information on page 3-39.
System Information
Use the System Information screen to define the device’s location, contact information for an
administrator, and the country where this access point is deployed.