Brocade Mobility Access Point System Reference Guide (Supporting software release 5.5.0.0 and later) - Manual (Page 441)

Brocade Mobility Access Point System Reference Guide 431
53-1003100-01
6
FIGURE 18 WLAN - Advanced Configuration screen
4. Refer to the Advanced RADIUS Configuration field to set the WLAN’s NAS configuration and
RADIUS Dynamic Authorization.
5. Refer to the Radio Rates field to define selected data rates for both the 2.4 GHz and 5.0 GHz
bands.
NAS Identifier Specify what is included in the RADIUS NAS-Identifier field for authentication and accounting
packets. This is an optional setting, and defaults are used if no values are provided.
NAS Port The profile database on the RADIUS server consists of user profiles for each connected network
access server (NAS) port. Each profile is matched to a user name representing a physical port.
When the access point authorizes users, it queries the user profile database using a user name
representative of the physical NAS port making the connection.
RADIUS Dynamic
Authorization Select this radio button to enable the RADIUS protocol to support unsolicited messages sent from
the RADIUS server. These messages allow administrators to issue change of authorization (CoA)
messages, which affect session authorization, or Disconnect Message (DM), which cause a session
to terminate immediately. This feature is disabled by default.