Brocade Mobility Access Point System Reference Guide (Supporting software release 5.5.0.0 and later) - Manual (Page 514)

504 Brocade Mobility Access Point System Reference Guide
53-1003100-01
7
FIGURE 9 AAA Policy - RADIUS Authentication tab - Authentication Server screen
8. Define the following settings to add or modify AAA RADIUS authentication server configuration:
Server Id Define the numerical server index (1-6) for the authentication server to differentiate it from others
available to the access point’s AAA policy.
Host Specify the IP address or hostname of the RADIUS authentication server.
Port Define or edit the port on which the RADIUS server listens to traffic within then access point
managed network. The port range is 1 to 65,535. The default port is 1812.
Server Type Select the type of AAA server as either Host, onboard-self or onboard-controller. Brocade Mobility
6511 Access Point do not have an onboard authentication resource and must use an external
server or Virtual Controller AP resource.
Secret Specify the secret used for authentication on the selected RADIUS server. By default the secret will
be displayed as asterisks.
Request Proxy Mode Select the method of proxy that browsers communicate with the RADIUS authentication server. The
mode could either be None, Through Wireless Controller or Through RF Domain Manager.
Proxy Mint Host Specify the hostname (if the device is a Level-1 MiNT neighbor) or the Mint-ID of the Mint device to
proxy hosts through.