Brocade Mobility Access Point System Reference Guide (Supporting software release 5.5.0.0 and later) - Manual (Page 771)

Brocade Mobility Access Point System Reference Guide 761
53-1003100-01
13
FIGURE 38 Access Point - AP Detection
The AP Detection screen displays the following:
Wireless Clients
Access Point Statistics
The Wireless Clients screen displays credential information for wireless clients associated with an
access point. Use this information to assess if configuration changes are required to improve
network performance.
Unsanctioned AP Displays the MAC address of a detected access point that is yet to be authorized for
interoperability within the access point managed network.
Reporting AP Displays the hardware encoded MAC address of the radio used by the detecting access point.
Select an access point to display configuration and network address information in greater
detail.
SSID Displays the WLAN SSID the unsanctioned access point was detected on.
AP Mode Displays the operating mode of the unsanctioned access point.
Radio Type Displays the type of the radio on the unsanctioned access point. The radio can be 802.11b,
802.11bg, 802.1bgn, 802.11a or 802.11an.
Channel Displays the channel the unsanctioned access point is currently transmitting on.
RSSI Lists a relative signal strength indication (RSSI) for a detected (and perhaps unsanctioned)
access point.
Last Seen Displays the time (in seconds) the unsanctioned access point was last seen on the network.
Clear All Select the Clear All button to clear the screen of its current status and begin a new data
collection.
Refresh Select the Refresh button to update the screen’s statistics counters to their latest values.