Brocade Mobility Access Point System Reference Guide (Supporting software release 5.5.0.0 and later) - Manual (Page 206)

196 Brocade Mobility Access Point System Reference Guide
53-1003100-01
5
Profile Management Configuration
System Profile Configuration
The access point has mechanisms to allow/deny management access to the network for separate
interfaces and protocols (HTTP, HTTPS, Telnet, SSH or SNMP). These management access
configurations can be applied strategically to profiles as resource permissions dictate.
Additionally, an administrator can define a profile with unique configuration file and device
firmware upgrade support.
To define a profile’s management configuration:
1. Select the Configuration tab from the Web UI.
2. Select Devices.
3. Select System Profile from the options on left-hand side of the UI.
4. Expand the Management menu item and select Settings.