Policy based routing – Brocade Mobility Access Point System Reference Guide (Supporting software release 5.5.0.0 and later) User Manual

Page 774

764

Brocade Mobility Access Point System Reference Guide

53-1003100-01

Policy Based Routing

The Policy Based Routing statistics screen displays statistics for selective path packet redirection.
PBR can optionally mark traffic for preferential services (QoS). PBR is applied to incoming routed
packets, and a route-map is created containing a set of filters and associated actions. Based on
the actions defined in the route-map, packets are forwarded to the next relevant hop. Route-maps
are configurable under a global policy called routing-policy, and applied to profiles and devices.

To review access point PBR statistics:

1. Select the Statistics menu from the Web UI.

2. Select System from the navigation pane (on the left-hand side of the screen). Expand a RF

Domain and select one of its connected access points.

3. Select Policy Based Routing.

Radio Count

Displays the cumulative number of peer access point radios deployed within each listed
WLAN.

Tx Bytes

Displays the average number of transmitted bytes sent on each listed WLAN.

Tx User Data Rate

Displays the transmitted user data rate in kbps for each listed WLAN.

Rx Bytes

Displays the average number of packets in bytes received on each listed WLAN.

Rx User Data Rate

Displays the received user data rate on each listed WLAN.

Disassociate All Clients

Select an WLAN then Disassociate All Clients

to terminate the client connections within that

WLAN.

Refresh

Select the

Refresh

button to update the screen’s statistics counters to their latest values.