Brocade Mobility Access Point System Reference Guide (Supporting software release 5.5.0.0 and later) - Manual (Page 58)

48 Brocade Mobility Access Point System Reference Guide
53-1003100-01
4
FIGURE 6 Dashboard - Health tab - Client RF Quality Index field
1. The Client RF Quality Index displays the following:
2. Periodically select Refresh (at the bottom of the screen) to update client RF quality.
Inventory
Dashboard Conventions
The Inventory tab displays information relative to the devices managed by the selected access
point. The Inventory screen affords a system administrator an overview of the number and state of
managed devices. The screen contains links to display more granular data specific to a radio.
Worst 5 Lists the worst 5 performing client radios connected to the access point. The RF Quality Index
measures the overall effectiveness of the RF environment as a percentage. Its a function of the
connect rate in both directions, as well as the retry rate and the error rate.
The quality is measured as:
•
0-20 – Very poor quality
•
20-40 – Poor quality
•
40-60 – Average quality
•
60-100 – Good quality
Client MAC Displays the factory encoded MAC address assigned to each connected radio listed. Use this
information to assist in the identification of poorly performing radios.
Retry Rate Lists the number of retries attempted to re-connect with the listed radio.