Ap detection – Brocade Mobility Access Point System Reference Guide (Supporting software release 5.5.0.0 and later) User Manual
Page 770
760
Brocade Mobility Access Point System Reference Guide
53-1003100-01
13
FIGURE 37
Access Point - Pending Adoptions screen
The Pending Adoptions screen provides the following:
AP Detection
The AP Detection screen displays potentially hostile access points, their SSIDs, reporting AP, and so
on. Continuously revalidating the credentials of detected devices reduces the possibility of an
access point hacking into the network.
To view the AP detection statistics:
1. Select the Statistics menu from the Web UI.
2. Select System from the navigation pane (on the left-hand side of the screen). Expand a RF
Domain and select one of its connected access points.
3. Select AP Detection.
MAC Address
Displays the MAC address of the device pending adoption.
Type
Displays the access point’s model type.
IP Address
Displays the current network IP Address of the device pending adoption.
VLAN
Displays the current VLAN used as a virtual interface by device pending adoption.
Reason
Displays the status as to why the device is still pending adoption and has not yet successfully
connected to this access point.
Discovery Option
Displays the discovery option code for each access point listed pending adoption.
Last Seen
Displays the date and time stamp of the last time the device was seen. Click the arrow next to
the date and time to toggle between standard time and UTC.
Refresh
Select the Refresh
button to update the screen’s statistics counters to their latest values.