Brocade Mobility Access Point System Reference Guide (Supporting software release 5.5.0.0 and later) - Manual (Page 331)

Brocade Mobility Access Point System Reference Guide 321
53-1003100-01
5
FIGURE 168 Device Overrides - Network Bridge VLAN - IGMP Snooping screen
Set the following parameters to configure IGMP Snooping values:
Set the following parameters for Multicast Router configuration:
Enable IGMP Snooping Select this option to enable IGMP snooping. If disabled, snooping on this bridge VLAN is disabled.
This feature is enabled by default. If disabled, the settings under bridge configuration are
overridden.
Forward Unknown
Multicast Packets Select this option to enable the access point to forward multicast packets from unregistered
multicast groups. If disabled, the Unknown Multicast Forward feature is also disabled for the
selected VLANs. This settings is enabledby default.
Interface Name Select the interface used for IGMP snooping over a multicast router. Multiple interfaces can be
selected.
Multicast Router Learn Mode Set the learning mode to either pim-dvmrp or static.