Brocade Mobility Access Point System Reference Guide (Supporting software release 5.5.0.0 and later) - Manual (Page 283)

Brocade Mobility Access Point System Reference Guide 273
53-1003100-01
5
FIGURE 139 Device Overrides - Access Point Radios screen
NOTE
A blue override icon (to the left of a parameter) defines the parameter as having an override applied.
To remove an override, go to the Basic Configuration screen’s Device Overrides field and select Clear
Overrides. This will remove all overrides from the device.
Review the following radio configuration data to determine whether a radio configuration requires
modification or override:
Name Displays whether the reporting radio is the access point’s radio1, radio2 or radio3. Brocade
Mobility 7131 Access Point models can support up to 3 radios. Brocade Mobility 1220 Access
Point, Brocade Mobility 1220 Access Point, Brocade Mobility 1240 Access Point models support 2
radios and Brocade Mobility 6511 Access Point support a single radio.
Type Displays the type as either Radio (for typical client support) or sensor. If setting an Brocade Mobility
6511 Access Point to function as a sensor, the access point must be rebooted before it can begin
to operate as a sensor.
Description Displays a brief description of the radio provided by the administrator when the radio’s
configuration was added or modified.
Admin Status Defines the radio as either enabled or disabled for client or sensor support.