Brocade Mobility Access Point System Reference Guide (Supporting software release 5.5.0.0 and later) - Manual (Page 764)

754 Brocade Mobility Access Point System Reference Guide
53-1003100-01
13
The Fan Speed field displays the following:
The Temperature field displays the following:
The Kernal Buffers field displays the following:
The IP Domain field displays the following:
The IP Name Servers field displays the following:
The Firmware Images field displays the following:
Current File
Description Displays the access point’s current file description.
Maximum File
Description Displays the access point’s maximum file description.
CPU Load 1 Minute Lists this access point’s CPU utilization over a 1 minute span.
CPU Load 5 Minutes Lists this access point’s CPU utilization over a 5 minute span.
CPU Load 15 Minutes Lists this access point’s CPU utilization over a 15 minute span.
Number Displays the number of fans supported on the this access point.
Speed (Hz) Displays the fan speed in Hz.
Number Displays the number of temperature elements used by the access point.
Temperature Displays the current temperature (in Celsius) to assess a potential access point overheat
condition.
Buffer Size Lists the sequential buffer size.
Current Buffers Displays the current buffers available to the selected access point.
Maximum Buffers Lists the maximum buffers available to the selected access point.
IP Domain Name Displays the name of the IP Domain service used with the selected access point.
IP Domain Lookup
state Lists the current state of an IP lookup operation.
Name Server Displays the names of the servers designated to provide DNS resources to this access point.
Type Displays the type of server for each server listed.
Primary Build Date Displays the build date when this access point firmware version was created.
Primary Install Date Displays the date this version was installed.
Primary Version Displays the primary version string.
Secondary Build Date Displays the build date when this version was created.
Secondary Install Date Displays the date this secondary version was installed.
Secondary Version Displays the secondary version string.
FPGA Version Displays whether a FPGA supported firmware load is being utilized.