Brocade Mobility Access Point System Reference Guide (Supporting software release 5.5.0.0 and later) - Manual (Page 288)

278 Brocade Mobility Access Point System Reference Guide
53-1003100-01
5
FIGURE 141 Device Overrides - WLAN Mapping tab
Refer to the WLAN/BSS Mappings field to set or override WLAN BSSID assignments for an existing
access point deployment. Use the ‘<‘ or ‘>’ buttons to assign WLANs and mesh points to the
available BSSIDs.
Administrators can assign each WLAN its own BSSID. If using a single-radio Brocade Mobility 6511
Access Point, there are 8 BSSIDs available. If using a dual-radio Brocade Mobility 1220 Access
Point, Brocade Mobility 1220 Access PointM, Brocade Mobility 1240 Access Point, Brocade
Mobility 7131 Access Point, there are 16 BSSIDs for the 802.11b/g/n radio and 16 BSSIDs for the
802.11a/n radio.
Select OK to save the changes and overrides to the WLAN Mapping. Select Reset to revert to the
last saved configuration.
Select the Legacy Mesh tab.