Brocade Mobility Access Point System Reference Guide (Supporting software release 5.5.0.0 and later) - Manual (Page 321)

Brocade Mobility Access Point System Reference Guide 311
53-1003100-01
5
FIGURE 161 Device Overrides - Network - OSPF Interface Settings screen
Review existing Interface Settings using:
Select the Add button to define a new set of virtual interface basic settings, or Edit to update the
settings of an existing virtual interface configuration.
Name Displays the name defined for the interface configuration.
Type Displays the type of interface.
Description Lists each interface’s 32 character maximum description.
Admin Status Displays whether Admin Status privileges have been enabled or disabled for the OSPF route’s
virtual interface connection.
VLAN Lists the VLAN IDs set for each listed OSPF route virtual interface.
IP Address Displays the IP addresses defined as virtual interfaces for dynamic OSPF routes. Zero config and
DHCP can be used to generate route addresses, or a primary and secondary address can be
manually provided.