Brocade Mobility Access Point System Reference Guide (Supporting software release 5.5.0.0 and later) - Manual (Page 352)

342 Brocade Mobility Access Point System Reference Guide
53-1003100-01
5
Overriding General Security Settings
Overriding a Security Configuration
A profile can leverage existing firewall, wireless client role and WIPS policies and configurations
and apply them to the configuration. This affords a profile a truly unique combination of data
protection policies. However, as deployment requirements arise, an individual access point may
need some or all of its general security configuration overridden from that applied in the profile.
To define a profile’s security settings and overrides:
Select Devices from the Configuration tab.
Select Device Overrides from the Device menu to expand it into sub menu options.
Select a target device from the device browser in the lower, left-hand, side of the UI.
Select Security to expand its sub menu options.
Select Settings.
NOTE
A blue override icon (to the left of a parameter) defines the parameter as having an override applied.
To remove an override, go to the Basic Configuration screen’s Device Overrides field and select Clear
Overrides. This will remove all overrides from the device.
FIGURE 184 Device Overrides - Security Settings screen