Brocade Mobility Access Point System Reference Guide (Supporting software release 5.5.0.0 and later) - Manual (Page 725)

Brocade Mobility Access Point System Reference Guide 715
53-1003100-01
13
FIGURE 11 RF Domain - AP Detection screen
The AP Detection screen displays the following:
Wireless Clients
RF Domain Statistics
The Wireless Clients screen displays device information for wireless clients connected to RF
Domain member access points. Review this content to determine whether a client should be
removed from access point association within the selected RF Domain.
To review a RF Domain’s connected wireless clients:
1. Select the Statistics menu from the Web UI.
2. Select a RF Domain from under the System node on the top, left-hand side, of the screen.
3. Select Wireless Clients from the RF Domain menu.
BSSID Displays the Broadcast Service Set ID (SSID) of the network to which the detected access
point belongs.
Channel Displays the channel of operation used by the detected access point. The channel must
be utilized by both the access point and its connected client and be approved for the
target deployment country.
SSID Displays the Service Set ID (SSID) of the network to which the detected access point
belongs.
RSSI Displays the Received Signal Strength Indicator (RSSI) of the detected access point. Use
this variable to help determine whether a device connection would improve network
coverage or add noise.
Reported by Displays the MAC address of the RF Domain member reporting the access point.
Clear All Select Clear All to reset the statistics counters to zero and begin a new data collection.
Refresh Select the Refresh button to update the statistics counters to their latest values.