Brocade Mobility Access Point System Reference Guide (Supporting software release 5.5.0.0 and later) - Manual (Page 436)

426 Brocade Mobility Access Point System Reference Guide
53-1003100-01
6
FIGURE 15 WLAN Accounting screen
4. Set the following Syslog Accounting information:
5. Select Enable RADIUS Accounting to use an external RADIUS resource for AAA accounting.
When the radio button is selected, a AAA Policy field displays. Either use the default AAA policy
with the WLAN, or select Create to define a new AAA configuration that can be applied to the
WLAN. This setting is disabled by default.
6. Select OK when completed to update this WLAN’s accounting settings. Select Reset to revert
the screen back to its last saved configuration.
Enable System Log
Accounting Select this option for the access point to generate accounting records in standard syslog format
(RFC 3164). The feature is disabled by default.
Syslog Host Specify the IP address (or hostname) of the external syslog host where accounting records are
routed.
Syslog Port Use the spinner control to set the destination UDP port of the external syslog host where accounting
records are routed. The default port is 514.
Proxy Mode Use the drop-down menu to define how syslog accounting is conducted. Options include None,
Through Wireless Controller and Through RF Domain Manager.
Format Select the format used to include (pack) the MAC address in a syslog request. Options include No
Delimiter (aabbccddeeff), Colon Delimiter (aa:bb:cc:dd:ee:ff), Dash Delimiter (aa-bb-cc-dd-ee-ff),
Dot Delimiter per four (aabb.ccdd.eef) and Middle Dash Delimiter (aabbcc-ddeeff). The default
setting is Dash Delimiter (aa-bb-cc-dd-ee-ff).
Case Use the drop-down menu to specify whether the MAC address format supplied is specified in upper
or lower case. The default setting is upper case.