Brocade Mobility Access Point System Reference Guide (Supporting software release 5.5.0.0 and later) - Manual (Page 249)

Brocade Mobility Access Point System Reference Guide 239
53-1003100-01
5
FIGURE 120 Certificate Management - Create Certificate screen
Set the following Create New Self-Signed Certificate configuration parameters:
Certificate Name Enter the 32 character maximum name assigned to identify the name of the trustpoint associated
with the certificate. A trustpoint represents a CA/identity pair containing the identity of the CA,
CA-specific configuration parameters, and an association with an enrolled identity certificate.
Use Existing Select this option to use an existing RSA key. Use the drop-down menu to select the existing key
used by both the device and the server (or repository) of the target RSA key.
Create New Select this option to create a new RSA key. Provide a 32 character name to identify the RSA key.
Use the spinner control to set the size of the key (from 1,024 - 2,048 bits). Brocade recommends
leaving this value at the default setting (1024) to ensure optimum functionality. For more
information on creating a new RSA key, see RSA Key Management on page 5-233.