Brocade Mobility Access Point System Reference Guide (Supporting software release 5.5.0.0 and later) - Manual (Page 772)

762 Brocade Mobility Access Point System Reference Guide
53-1003100-01
13
To view wireless client statistics:
1. Select the Statistics menu from the Web UI.
2. Select System from the navigation pane (on the left-hand side of the screen). Expand a RF
Domain and select one of its connected access points.
3. Select Wireless Clients.
FIGURE 39 Access Point - Wireless Clients screen
The Wireless Clients screen displays the following:
Client MAC Displays the hardcoded MAC address assigned to the client at the factory. The address
displays as a link that can be selected to display configuration and network address
information in greater detail.
IP Address Displays the unique IP address of the client. Use this address as necessary throughout the
applet for filtering and device intrusion recognition and approval.
Hostname Displays the hostname (MAC addresses) of connected wireless clients. The hostname displays
as a link that can be selected to display configuration and network address information in
greater detail.
Role Lists the client’s defined role within the access point managed network.
Client Identity Displays the unique identity of the listed client as it appears to its adopting access point.
Vendor Displays the name of the client vendor (manufacturer).
Band Displays the 802.11 radio band on which the listed wireless client operates.
AP Hostname Displays the administrator assigned hostname of the access point to which this access point is
adopted.
Radio MAC Displays the MAC address of the radio which the wireless client is using.
WLAN Displays the name of the WLAN the access point's using with each listed client. Use this
information to determine if the client's WLAN assignment best suits its intended deployment in
respect to the WLAN's QoS objective.
VLAN Displays the VLAN ID each listed client is currently mapped to as a virtual interface for access
point interoperability.
Last Active Displays the time when this wireless client was last seen (or detected) by a device within the
access point managed network.