Brocade Mobility Access Point System Reference Guide (Supporting software release 5.5.0.0 and later) - Manual (Page 683)

Brocade Mobility Access Point System Reference Guide 673
53-1003100-01
12
FIGURE 36 Devices Captive Portal Pages - CP Page Image File screen
Use the Captive Portal List drop-down list to select the captive portal configuration to upload to the
adopted access points.
2. Set the following file transfer configuration parameters of the required file transfer activity:
Protocol If Advanced is selected, choose the protocol for file management. Available options
include:
•
tftp
•
ftp
•
sftp
•
http
•
cf
•
usb1
•
usb2
•
usb3
•
usb4
This parameter is required only when Server is selected as the Source and Advanced
is selected.
Port If Advanced is selected, specify the port for transferring files. This option is not
available for cf, usb1, usb2, usb3 and usb4. Enter the port number directly or use
the spinner control.
IP Address If Advanced is selected, specify the IP address of the server used to transfer files.
This option is not valid for cf, usb1, usb2, usb3 and usb4. If IP address of the server
is provided, a Hostname is not required.