Brocade Mobility Access Point System Reference Guide (Supporting software release 5.5.0.0 and later) - Manual (Page 96)

86 Brocade Mobility Access Point System Reference Guide
53-1003100-01
5
6. Select Add to define a new Virtual Interface configuration, Edit to modify the configuration of
an existing Virtual Interface or Delete to permanently remove a selected Virtual Interface.
FIGURE 17 Virtual Interfaces - Basic Configuration tab
The Basic Configuration screen displays by default regardless of a whether a new Virtual Interface
is being created or an existing one is being modified.
7. If creating a new Virtual Interface, use the Name spinner control to define a numeric ID from 1
- 4094.
8. Define the following parameters from within the Properties field:
Description Provide or edit a description (up to 64 characters) for the Virtual Interface that helps differentiate it
from others with similar configurations.
Admin Status Either select the Disabled or Enabled radio button to define this interface’s current status within
the network. When set to Enabled, the Virtual Interface is operational and available. The default
value is Disabled.