Brocade Mobility Access Point System Reference Guide (Supporting software release 5.5.0.0 and later) - Manual (Page 819)

Brocade Mobility Access Point System Reference Guide 809
53-1003100-01
13
Packet Flows
Firewall
The Packet Flows screen displays data traffic packet flow utilization. The chart represents the
different protocol flows supported, and displays a proportional view of the flows in respect to their
percentage of data traffic utilized.
The Total Active Flows graph displays the total number of flows supported. Other bar graphs display
for each individual packet type.
To view access point packet flows statistics:
1. Select the Statistics menu from the Web UI.
2. Select System from the navigation pane (on the left-hand side of the screen). Expand a RF
Domain and select one of its connected access points.
3. Select Firewall and expand the menu to reveal its sub menu items.
4. Select Packet Flows.
5. Periodically select Refresh to update the statistics counters to their latest values. Clear All
clears all the statistics counters and begins a new data collection.
FIGURE 74 Access Point - Firewall Packet Flows screen
Denial of Service
Firewall