Brocade Mobility Access Point System Reference Guide (Supporting software release 5.5.0.0 and later) - Manual (Page 164)

154 Brocade Mobility Access Point System Reference Guide
53-1003100-01
5
Network Service Alias
Alias
Network Service Alias is a set of configurations that consist of protocol and port mappings. Both
source and destination ports are configurable. For each protocol, up to 2 source port ranges and
up to 2 destination port ranges can be configured. A maximum of 4 protocol entries can be
configured per Network Service Alias.
Use a service alias to associate more than one IP address to a network interface, providing multiple
connections to a network from a single IP node.
A Network Service Alias can be used to substitute protocols and ports in IP firewall rules:
To edit or delete a service alias configuration:
1. Select Configuration tab from the web user interface.
Select System Profiles.
Select Network to expand it and display its sub menus.
Select the Alias item, the Basic Alias screen displays.
Select the Network Service Alias tab. The following screen displays.
FIGURE 58 Network - Alias - Network Service Alias screen
Select Edit to modify the attributes of an existing policy or Delete to remove obsolete policies from
the list of those available. Select Add to create a new Network Service Alias.