Brocade Mobility Access Point System Reference Guide (Supporting software release 5.5.0.0 and later) - Manual (Page 209)

Brocade Mobility Access Point System Reference Guide 199
53-1003100-01
5
10. Use the Persist Configuration Across Reloads option to define how the access point saves (in
flash memory) the configuration received from its connected Virtual Controller. Stored
configurations can be made available to the access point if the access point’s connected
Virtual Controller were to be unreachable. Options include Enabled, Disabled and Secure.
Use the HTTP Analytics area to configure how analytics is sent to the HTTP analytics server. Select
the Compress option to send the HTTP analytics compressed. Use the Update Interval fields to
configure the update interval between two updates to the HTTP analytics server.
11. Select OK to save the changes made to the profile’s Management Settings. Select Reset to
revert to the last saved configuration.
12. Select Firmware from the Management menu.
FIGURE 94 Profile Management - Firmware screen
Sender E-mail Address Specify the E-mail address where notification E-mails are originated.
Recipient's E-mail Address Specify the destination E-mail address where notification E-mails are sent. Multiple E-mail
addresses can be specified by typing each address individually and selecting the button next to
the E-mail text box to add it to a list.
Username for SMTP Server Specify the sender’s username on the outgoing SMTP server. Many SMTP servers require users
to authenticate with a username and password before sending E-mail through the server.
Password for SMTP Server Specify the sender’s username password on the outgoing SMTP server. Many SMTP servers
require users to authenticate with a username and password before sending E-mail through
the server.