Brocade Mobility Access Point System Reference Guide (Supporting software release 5.5.0.0 and later) - Manual (Page 671)

Brocade Mobility Access Point System Reference Guide 661
53-1003100-01
12
FIGURE 25 AP Upgrade screen - Upgrade Status screen
Refer to the following fields to understand the status of the number of device being updated:
Refer to the following fields for more information:
Number of devices currently
being upgraded Lists the number of firmware upgrades currently in-progress and downloading for
selected devices. Once the device has the image it requires a reboot to implement
the firmware image.
Number of devices currently
being rebooted Lists the number devices currently booting after receiving an upgrade image. The
reboot is required to implement the new image and renders the device offline during
that period. Using the Device Upgrade List, reboots can be staggered or placed on
hold to ensure device remains in service.
Number of devices waiting in
queue to be upgraded Lists the number of devices waiting to receive a firmware image from their
provisioning access point. Each device can have its own upgrade time defined, so
the upgrade queue could be staggered.
Number of devices waiting in
queue to be rebooted Lists the number of devices waiting to reboot before actively utilizing its upgraded
image. The Device Upgrade List list allows an administrator to disable or stagger the
reboot time, so device reboots may not occur immediately after an upgrade. The
reboot operation renders the device offline until completed so reboots can
scheduled for periods of reduced load.
Number of devices marked for
cancellation Displays the total number of device upgrades that have been manually cancelled
during the upgrade operation.
Device Type Displays the model number of devices pending an upgrade. Each listed device is
provisioned an image file unique to that model.
Hostname Lists the factory encoded MAC address of a device either currently upgrading or
in the queue of scheduled upgrades.
MAC Address Lists the factory encoded MAC address of a device either currently upgrading or
in the queue of scheduled upgrades.
Result Lists the state of an upgrade operation (downloading, waiting for a reboot etc.).