Brocade Mobility Access Point System Reference Guide (Supporting software release 5.5.0.0 and later) - Manual (Page 811)

Brocade Mobility Access Point System Reference Guide 801
53-1003100-01
13
DHCP Options
Network
Supported access points can use a DHCP server resource to provide the dynamic assignment of IP
addresses automatically. This is a protocol that includes IP address allocation and delivery of
host-specific configuration parameters from a DHCP server to a host. Some of these parameters
are IP address, gateway and network mask.
The DHCP Options screen provides the DHCP server name, image file on the DHCP server, and its
configuration.
To view a network’s DHCP Options:
1. Select the Statistics menu from the Web UI.
2. Select System from the navigation pane (on the left-hand side of the screen). Expand a RF
Domain and select one of its connected access points.
3. Select Network and expand the menu to reveal its sub menu items.
4. Select DHCP Options.
MiNT IDs Lists MiNT IDs for each listed VLAN. MiNT provides the means to secure access point profile
communications at the transport layer. Using MiNT, an access point can be configured to only
communicate with other authorized (MiNT enabled) access point of the same model.
Query Interval Lists the IGMP query interval implemented when the querier functionality is enabled. The
default value is 60 seconds.
Version Lists the multicast router IGMP version compatibility as either version 1, 2 or 3. The default
setting is 3.
Refresh Select the Refresh button to update the screen’s statistics counters to their latest values.