Brocade Mobility Access Point System Reference Guide (Supporting software release 5.5.0.0 and later) - Manual (Page 803)

Brocade Mobility Access Point System Reference Guide 793
53-1003100-01
13
The LDAP Agent Status screen displays the following:
GRE Tunnels
Access Point Statistics
Generic Routing Encapsulation (GRE) is one of the available tunneling mechanisms which uses IP
as the transport protocol and can be used for carrying many different passenger protocols. The
tunnels behave as virtual point-to-point links that have two endpoints identified by the tunnel
source and tunnel destination addresses at each endpoint.
To review a selected access point’s GRE statistics:
1. Select the Statistics menu from the Web UI.
2. Select System from the navigation pane (on the left-hand side of the screen). Expand a RF
Domain and select one of its connected access points.
3. Select GRE Tunnels .
LDAP Agent Primary Lists the primary IP address of a remote LDAP server resource used by the access
point to validate PEAP-MS-CHAP v2 authentication requests. When a RADIUS
server policy’s data source is set to LDAP, this is the first resource for
authentication requests.
LDAP Agent Secondary Lists the secondary IP address of a remote LDAP server resource used by the
access point to validate PEAP-MS-CHAP v2 authentication requests. When a
RADIUS server policy’s data source is set to LDAP, this is the second resource for
authentication requests.
Message Displays any system message generated in the access point’s connection with
the primary or secondary LDAP agent. If there’s a problem with the username and
password used to connection to the LDAP agent, it would be listed here.
Status Displays whether the access point has successfully joined the remote LDAP
server domain designated to externally validate PEAP-MS-CHAP v2 authentication
requests.
Refresh Select Refresh to update the statistics counters to their latest values.