Brocade Mobility Access Point System Reference Guide (Supporting software release 5.5.0.0 and later) - Manual (Page 503)

Brocade Mobility Access Point System Reference Guide 493
53-1003100-01
7
1. Select Configuration tab from the web UI.
2. Select Network.
3. Select Policy Based Routing.
The Policy Based Routing screen displays by default.
FIGURE 1 Policy Based Routing screen
4. Either select Add to create a new PBR configuration, Edit to modify the attributes of an existing
PBR configuration or Delete to remove a selected PBR configuration.
5. If creating a new PBR policy assign it a Policy Name up to 32 characters to distinguish this
route map configuration from others with similar attributes. Select Continue to proceed to the
Policy Name screen where route map configurations can be added, modified or removed.
Select Exit to exit without creating a PBR policy.