Brocade Mobility Access Point System Reference Guide (Supporting software release 5.5.0.0 and later) - Manual (Page 577)

Brocade Mobility Access Point System Reference Guide 567
53-1003100-01
8
FIGURE 24 Device Categorization screen - Marked Devices
3. If creating a new Device Categorization filter, provide it a Name (up to 32 characters). Select
OK to save the name and enable the remaining device categorization parameters.
4. Select + Add Row to populate the Marked Devices field with parameters for classifying an
access point or client and defining the target device’s MAC address and SSID. Select the red (-)
Delete Row icon as needed to remove an individual table entry.
5. Define the following parameters to add a device to a list of devices sanctioned for network
operation:
Select OK to save the updates to the Marked Devices List. Select Reset to revert to the last saved
configuration.
Classification Use the drop-down menu to designate the target device as either Sanctioned or
Neighboring.
Device Type Use the drop-down menu to designate the target device as either an access point or
client.
MAC Address Enter the factory coded MAC address of the target device. This address is hard coded by
the device manufacturer and cannot be modified. This MAC address is defined as
authorized or unauthorized as part of the device categorization process.
SSID Enter the SSID of the target device requiring categorization. The SSID cannot exceed 32
characters.