Brocade Mobility Access Point System Reference Guide (Supporting software release 5.5.0.0 and later) - Manual (Page 180)

170 Brocade Mobility Access Point System Reference Guide
53-1003100-01
5
FIGURE 70 Profile Security - Remote VPN Client tab
36. Refer to the following fields to define Remote VPN Client Configuration settings:
Refer to the following fields to define the Remote VPN Client Peer list.
37. Select OK to save the updates made to the Remote VPN Client screen. Selecting Reset reverts
the screen to its last saved configuration.
Select the Global Settings tab.
The Global Settings screen provides options for Dead Peer Detection (DPD). DPD represents the
actions taken upon the detection of a dead peer within the IPSec VPN tunnel connection.
Shutdown Select this option to disable the remote VPN client. The default is disabled.
Transform Set Configure the transform set used to specify how traffic is protected within the crypto ACL defining
the traffic that needs to be protected. Select the appropriate traffic set from the drop-down list or
click the icon next to the drop-down to create a new transform set.
IKEV2 Peer Use the drop-down to select the remote IKE v2 peer. Use the icon next to the drop-down to create a
new peer.
Priority Use the spinner to set the priority in which a remote peer is connected. The lower the number the
higher the priority.