Brocade Mobility Access Point System Reference Guide (Supporting software release 5.5.0.0 and later) - Manual (Page 276)

266 Brocade Mobility Access Point System Reference Guide
53-1003100-01
5
Refer the following to configure MD5 Authentication keys. Select the + Add Row button to add a row
to the table.
Select the OK button located at the bottom right of the screen to save the changes and overrides to
the Security screen. Select Reset to revert to the last saved configuration.
Port Channel Override Configuration
Profile Interface Override Configuration
Access points can have their port channel configurations overridden if a portion of the
configuration is no longer relevant to the access point’s deployment objective.
To override a port channel configuration for an access point profile:
Select the Configuration tab from the Web UI.
Select Devices from the Configuration tab.
Select Device Overrides
Select a target device from the device browser in the lower, left-hand, side of the UI.
Expand the Interface menu and select Port Channels. The following screen displays
FIGURE 135 Device Overrides - Port Channels screen
Key ID Set the unique MD5 Authentication key ID. The available key ID range is 1 - 255.
Password Set the OSPF password. This value is displayed as “asterisk” (*). Select show to expose the
characters comprising the password.