Brocade Mobility Access Point System Reference Guide (Supporting software release 5.5.0.0 and later) - Manual (Page 394)

384 Brocade Mobility Access Point System Reference Guide
53-1003100-01
5
FIGURE 212 Device Overrides - Advanced Profile Overrides MINT screen - Settings tab
Refer to the Area Identifier field to define or override the Level 1 and Level 2 Area IDs used by the
profile’s MINT configuration.
Define or override the following Priority Adjustment settings:
Select the Latency of Routing Recalculation option (within the Shortest Path First (SPF) field) to
enable the spinner control used for defining or overriding a latency period from 0 - 60 seconds. The
default setting has the option disabled.
Level 1 Area ID Select this option to enable a spinner control for setting the Level 1 Area ID from 1 -
4,294,967,295. The default value is disabled.
Designated IS Priority
Adjustment Use the spinner control to set a Designated IS Priority Adjustment setting from -255 - +255.
This is the value added to the base level DIS priority to influence the Designated IS (DIS)
election. A value of +1 or greater increases DISiness. The default setting is 0.