Brocade Mobility Access Point System Reference Guide (Supporting software release 5.5.0.0 and later) - Manual (Page 238)

228 Brocade Mobility Access Point System Reference Guide
53-1003100-01
5
FIGURE 112 Device Overrides - Certificates screen
Set the following Management Security certificate configurations:
Set the RADIUS Security certificate configuration. Select the Stored radio button to enable a
drop-down menu where an existing certificate/trustpoint can be leveraged. To leverage an existing
device certificate for use with this target device, select the Launch Manager button.
NOTE
Pending trustpoints and RSA keys are typically not verified as existing on a device.
Select OK to save the changes made to the certificate configurations. Selecting Reset reverts the
screen to its last saved configuration.
For more information on the certification activities, refer to the following:
• Manage Certificates
• RSA Key Management
• Certificate Creation
HTTPS Trustpoint Either use the default-trustpoint or select the Stored radio button to enable a drop-down menu
where an existing certificate/trustpoint can be leveraged. To leverage an existing device certificate
for use with this target device, select the Launch Manager button. For more information, see
Manage Certificates on page 5-229.
SSH RSA Key Either use the default_rsa_key or select the Stored radio button to enable a drop-down menu where
an existing certificate can be leveraged. To leverage an existing key, select the Launch Manager
button. For more information, see RSA Key Management on page 5-233.