Brocade Mobility Access Point System Reference Guide (Supporting software release 5.5.0.0 and later) - Manual (Page 105)

Brocade Mobility Access Point System Reference Guide 95
53-1003100-01
5
Access Point Radio Configuration
Profile Interface Configuration
An access point profile can have its radio configuration modified once its radios have successfully
associated to the network.
To define a access point radio configuration:
1. Select the Configuration tab from the Web UI.
2. Select Devices.
3. Select System Profile from the options on left-hand side of the UI.
4. Expand the Interface menu and select Radios.
FIGURE 23 Access Point Radios screen
5. Review the following radio configuration data to determine whether a radio configuration
requires modification to better support the network:
Name Displays whether the reporting radio is radio 1, radio 2 or radio 3. Brocade Mobility 7131 Access
Point models can have up to 3 radios depending on the SKU. Brocade Mobility 1220 Access Point,
Brocade Mobility 1220 Access Point, Brocade Mobility 1240 Access Points have 2 radios, while
Brocade Mobility 6511 Access Point model have 1 radio.
Type Displays the type of radio housed by each listed access point.
Description Displays a brief description of the radio provided by the administrator when the radio’s
configuration was added or modified.