Brocade Mobility Access Point System Reference Guide (Supporting software release 5.5.0.0 and later) - Manual (Page 801)

Brocade Mobility Access Point System Reference Guide 791
53-1003100-01
13
Critical Resources
Access Point Statistics
The Critical Resources statistics screen displays a list of device IP addresses on the network
(gateways, routers etc.). These IP addresses are critical to the health of the network. These device
addresses are pinged regularly by managed access points. If there’s a connectivity issue, an event
is generated stating a critical resource is unavailable. Thus, each device’s VLAN, ping mode and
state is displayed for the administrator.
To review a selected access point’s critical resource statistics:
1. Select the Statistics menu from the Web UI.
2. Select System from the navigation pane (on the left-hand side of the screen). Expand a RF
Domain and select one of its connected access points.
3. Select Critical Resources.
FIGURE 60 Access Point - Critical Resources screen
4. Refer to the General field to assess the Monitor Interval used to poll for updates from critical
resources and the Source IP For Port-Limited Monitoring of critical resources.
The access point Critical Resource screen displays the following:
Critical Resource Name Lists the name of the critical resource monitored by the access point. Critical resources are
device IP addresses on the network (gateways, routers etc.). These IP addresses are critical to
the health of the network. These device addresses are pinged regularly by access points. If
there’s a connectivity issue, an event is generated stating a critical resource is unavailable.
Via Lists the VLAN used by the critical resource as a virtual interface. The critical resource displays
as a link than can be selected to list configuration and network address information in greater
detail.