Brocade Mobility Access Point System Reference Guide (Supporting software release 5.5.0.0 and later) - Manual (Page 337)

Brocade Mobility Access Point System Reference Guide 327
53-1003100-01
5
Network Basic Alias
Overriding Alias Configuration
A basic alias is a set of configurations that consist of VLAN, host, network and address range alias
configurations. VLAN configuration is a configuration for optimal VLAN re-use and management for
local and remote deployments. A host alias configuration is for a particular host device’s IP
address. A network alias configuration is utilized for an IP address on a particular network. An
address range alias is a configuration for a range of IP addresses.
A basic alias configuration can contain multiple instances for each of the five (5) alias types.
To override a basic alias configuration:
1. Select Devices from the Configuration tab.
Select Device Overrides from the Device menu to expand it into sub menu options.
Select a target device from the device browser in the lower, left-hand side of the UI.
Select Network to expand it and display its sub menus.
Select the Alias item, the Basic Alias screen displays.
FIGURE 172 Network - Basic Alias screen
Select + Add Row to define VLAN Alias settings.