Brocade Mobility Access Point System Reference Guide (Supporting software release 5.5.0.0 and later) - Manual (Page 804)

794 Brocade Mobility Access Point System Reference Guide
53-1003100-01
13
FIGURE 62 Access Point - GRE Tunnels screen
The access point GRE Tunnels screen displays the following:
Dot1x
Access Point Statistics
Dot1x (or 802.1x) is an IEEE standard for network authentication. Devices supporting Dot1x allow
the automatic provision and connection to the wireless network without launching a Web browser
at login. When within range of a Dot1x network, a device automatically connects and authenticates
without needing to manually login.
To view the Dot1x statistics:
1. Select the Statistics menu from the Web UI.
GRE State Displays the current operational state of the GRE tunnel.
Peer IP Address Displays the IP address of the peer device on the remote end of the GRE tunnel.
Tunnel Id Displays the session ID of an established GRE tunnel. This ID is only viable while the tunnel is
operational.
Total Packets Received Displays the total number of packets received from a peer at the remote end of the GRE
tunnel.
Total Packets Sent Displays the total number of packets sent from this access point to a peer at the remote end
of the GRE tunnel.
Total Packets Dropped Lists the number of packets dropped from tunneled exchanges between this access point and
a peer at the remote end of the VPN tunnel
Refresh Select the Refresh button to update the screen’s statistics counters to their latest value.