Brocade Mobility Access Point System Reference Guide (Supporting software release 5.5.0.0 and later) - Manual (Page 303)

Brocade Mobility Access Point System Reference Guide 293
53-1003100-01
5
Either select Add to create a new L2TPv3 configuration, Edit to modify an existing tunnel
configuration or Delete to remove a tunnel from those available to this profile.
FIGURE 150 Device Overrides - Network - L2TPv3 screen, Add T2TP Tunnel Configuration
If creating a new tunnel configuration, assign it a 31 character maximum Name.
Establishment Criteria Specifies the criteria that should be met for a tunnel between two peers to be created and
maintained.
Critical Resource Specifies the critical resource that should exist for a tunnel between two peers to be created and
maintained. Critical resources are device IP addresses or interface destinations interpreted as
critical to the health of the network. Critical resources allow for the continuous monitoring of these
defined addresses. A critical resource, if not available, can result in the network suffering
performance degradation. A critical resource can be a gateway, AAA server, WAN interface or any
hardware or service on which the stability of the network depends. Critical resources are pinged
regularly. If there’s a connectivity issue, an event is generated stating a critical resource is
unavailable.
Peer IP Address Displays the IP address of the device at the other end of the L2TPv3 tunnel.
Host Name Specifies the administrator assigned hostname of the tunnel.