Delta Electronics Programmable Logic Controller DVP-PLC User Manual

Page 572

9 Application Instructions API 150-199

DVP-PLC Application Manual

9-100

M1520：

When On, CH2 pulse output will be forbidden.

M1521：

When On, CH3 pulse output will be forbidden.

M1336：

CH0 pulse output indication flag

M1337：

CH1 pulse output indication flag

M1522：

CH2 pulse output indication flag

M1523：

CH3 pulse output indication flag

M1305：

CH0 direction signal flag

M1306：

CH1 direction signal flag

M1532：

CH2 direction signal flag

M1533：

CH3 direction signal flag

M1534：

Deceleration time of CH0 setup flag (must used with D1348)

M1535：

Deceleration time of CH1 setup flag (must used with D1349)

M1536：

Deceleration time of CH2 setup flag (must used with D1350)

M1537：

Deceleration time of CH3 setup flag (must used with D1351)

2. Special

explanations:

D1198：

Close loop output/input ratio of CH0 (default: K100)

D1199：

Close loop output/input ratio of CH1 (default: K100)

D1478：

Close loop output/input ratio of CH2 (default: K100)

D1479：

Close loop output/input ratio of CH3 (default: K100)

D1220：

Phase setting of CH0 (Y0, Y1): determined by the last 2 digits of D1220; other digits are invalid.

1. K0: Y0 output

2. K1: Y0, Y1 AB-phase output; A ahead of B

3. K2: Y0, Y1 AB-phase output; B ahead of A

D1221：

Phase setting of CH1 (Y2, Y3): determined by the last 2 digits of D1221; other digits are invalid.

1. K0: Y2 output

2. K1: Y2, Y3 AB-phase output; A ahead of B

3. K2: Y2, Y3 AB-phase output; B ahead of A

D1229：

Phase setting of CH2 (Y4, Y5): determined by the last 2 digits of D1229; other digits are invalid.

1. K0: Y4 output

2. K1: Y4, Y5 AB-phase output; A ahead of B

3. K2: Y4, Y5 AB-phase output; B ahead of A

D1230：

Phase setting of CH3 (Y6, Y7): determined by the last 2 digits of D1230; other digits are invalid.

1. K0: Y6 output

2. K1: Y6, Y7 AB-phase output; A ahead of B

3. K2: Y6, Y7 AB-phase output; B ahead of A

D1222：

Time difference between the direction signal and pulse output of CH0

D1223：

Time difference between the direction signal and pulse output of CH1

D1383：

Time difference between the direction signal and pulse output of CH2

D1384：

Time difference between the direction signal and pulse output of CH3