Delta Electronics Programmable Logic Controller DVP-PLC - Manual (Page 435)

8 Application Instructions API 100-149
DVP-PLC Application Manual 8-33
API Mnemonic Operands Function
122 D EMUL P Floating Point Multiplication
Controllers
ES/EX/SS SA/SX/SC EH/SV
Bit Devices Word Devices Program Steps Type
OP X Y M S K H KnX KnY KnM KnS T C D E F
S
1
* * *
S
2
* * *
D *
DEMUL, DEMULP: 13 steps
PULSE 16-bit 32-bit
ES EX SS SA SX SC EH SV ES EX SS SA SX SC EH SV ES EX SS SA SX SC EH SV
Operands:
S
1
: Multiplicand S
2
: Multiplicator D: Product
Explanations:
1. See the specifications of each model for their range of use.
2. Flags: M1020 (zero flag); M1021 (borrow flag); M1022 (carry flag)
3. S
1
× S
2
= D. The floating point value in the register assigned by S
1
is multiplied with the floating point value in
the register designated by S
2
and the result is stored in the register designated by D. The multiplication is
conducted in binary floating point system.
4. If S
1
or S
2
is an designated constant K or H, the instruction will convert the constant into a binary floating point
value before the operation.
5. S
1
and S
2
can designate the same register. In this case, if the “continuous execution” instruction is in use,
during the period when the criteria contact in On, the register will be multiplied once in every scan by pulse
execution instruction DEMULP.
6. If the absolute value of the result ＞ maximum floating point available, the carry flag M1022 = On.
7. If the absolute value of the result ＜ minimum floating point available, the borrow flag M1021 = On.
8. If the result = 0, the zero flag M1020 = On.
Program Example 1:
When X1 = On, binary floating point (D1, D0) × binary floating point (D11, D10) and the result is stored in (D21, D20).
D0 DEMUL
X1
D10 D20
Program Example 2:
When X2 = On, K1234 (automatically converted into binary floating point) × binary floating point (D1, D0) and the
result is stored in (D11, D10).
K1234 DEMUL
X2
D0 D10
Remarks:
For floating point operations, see “5.3 Handling of Numeric Values”.