Delta Electronics Programmable Logic Controller DVP-PLC User Manual

Page 501

9 Application Instructions API 150-199

DVP-PLC Application Manual

9-29

D1336：

For EH/EH2/SV, low word of the current number of output pulses from CH0.

D1337：

For EH/EH2/SV, high word of the current number of output pulses from CH0.

D1338：

For EH/EH2/SV, low word of the current number of output pulses from CH1.

D1339：

For EH/EH2/SV, high word of the current number of output pulses from CH1.

D1340：

For EH/EH2/SV, settings of the first start frequency and the last end frequency of CH0.

D1343：

For EH/EH2/SV, settings of acceleration/deceleration time for CH0 pulse output.

D1352：

For EH/EH2/SV, settings of the first start frequency and the last end frequency of CH1.

D1353：

For EH/EH2/SV, settings of acceleration/deceleration time for CH1 pulse output.

D1375：

For EH2/SV, low word of the current number of output pulses from CH2.

D1376：

For EH2/SV, high word of the current number of output pulses from CH2.

D1377：

For EH2/SV, low word of the current number of output pulses from CH3.

D1378：

For EH2/SV, high word of the current number of output pulses from CH3.

D1379：

For EH2/SV, settings of the first start frequency and the last end frequency of CH2.

D1380：

For EH2/SV, settings of the first start frequency and the last end frequency of CH3.

D1348：

For EH2/SV, deceleration time for CH0 pulse output when M1534 = On.

D1349：

For EH2/SV, deceleration time for CH1 pulse output when M1535 = On.

D1350：

For EH2/SV, deceleration time for CH2 pulse output when M1536 = On.

D1351：

For EH2/SV, deceleration time for CH3 pulse output when M1537 = On.

D1381：

For EH2/SV, settings of acceleration/deceleration time for CH2 pulse output.

D1382：

For EH2/SV, settings of acceleration/deceleration time for CH3 pulse output.

D1383：

For EH2/SV, the time difference between the direction signal and pulse output sent by CH2.

D1384：

For EH2/SV, the time difference between the direction signal and pulse output sent by CH3.