Delta Electronics Programmable Logic Controller DVP-PLC - Manual (Page 284)

6 Application Instructions API 00-49
DVP-PLC Application Manual 6-72
M1000
FLT D10 D100
BIN K2X0 D200
FLT D200 D202
DEDIV K615 K10
DEDIV D100 D202
DEMUL D400 D300
DEBCD D20 D30
DINT D20 D40
D300
D400
D20
1
2
3
4
5
6
7
8
○ 1 D10 (BIN integer) is converted to D101 and D102 (binary floating point value).
○ 2 X7 ~ X0 (BCD value) are converted to D200 (BIN value).
○ 3 D200 (BIN integer) is converted to D203 and D202 (binary floating point value).
4The result of K615 ÷ K10 is stored in D301 and D300 (binary floating point value).
○ 5 The result of binary decimal division (D101, D100) ÷ (D203, D202) is stored in D401 and D400 (binary floating
point value).
○ 6 The result of binary decimal multiplication (D401, D400) × (D301, D300) is stored in D21 and D20 (binary
floating point value).
○ 7 D21 and D20 (binary floating point value) are converted to D31 and D30 (decimal floating point value).
○ 8 D21 and D20 (binary floating point value) are converted to D41 and D40 (BIN integer).