Brocade Network Advisor IP User Manual v12.1.0 - Manual (Page 951)

Brocade Network Advisor IP User Manual 897
53-1002947-01
LSP
30
Duplicating an LSP path
When you want to add a new LSP path, you can save work by duplicating an existing path and
editing the name and any other parameters you may want to change. You can duplicate an LSP
path by taking the following steps.
1. Select Configure > MPLS > LSP.
2. Select the Paths tab.
3. Select the path you want to duplicate.
4. Click the Duplicate button.
The Path Configuration dialog box of the Path Configuration wizard displays ( Figure 328 ). The
Name field contains the name of the duplicated path with _Copy appended. Refer to “Adding an
LSP path” for a description of how to use the Path Configuration wizard.
Deleting an LSP path
You can delete an LSP admin path by taking the following steps.
1. Select Configure > MPLS > LSP.
2. Select the Paths tab.
3. Select the path you want to delete.
4. Click the Delete button.
The LSP Delete Path Configuration wizard displays ( Figure 329 ).
FIGURE 329 Delete Path Configuration wizard
5. Click on a series of Next buttons to deploy.